LogTunnel setup - PULL scenario

Here we will show how to set up a basic LogTunnel Scenario (PULL).

This scenario shows how a PC behind SiteManager 1 can easily connect to a Webserver behind SiteManager 2 using the Secomea LogTunnel.

We use a PULL Master in this scenario. The Webserver and the PC  could be all sorts of end-devices such as SCADA sever, PLC, HMI, cameras, etc.

Example of a LogTunnel Scenario - access to a web server.

How to set it up

Step1

Configuration for SiteManager1, the LogTunnel Master.

Step 2

Configuration for the webserver (SiteManager2), the LogTunnel Client.

Step 3

Setup in the GateManager after linking the Master with the Client.

Step 4

Test the connection by using the LogTunnel DeviceAddress, in this case, 192.168.3.130, then you should have access to your end device.