GateManager Commands
  • 26 May 2021
  • 1 Minute to read
  • Contributors
  • Dark
    Light
  • PDF

GateManager Commands

  • Dark
    Light
  • PDF

Article Summary

Introduction

The following describes commands provided by the GateManager server in the Linux shell.

Commands

You can use the following commands to control GateManager via the CLI (Command-line interface) i.e., “gm” The example below will show you the current status of your GateManager:

gm status 
  • start
    • Starts the GateManager
  • stop
    • Stops the GateManager
  • restart
    • Restarts the GateManager
  • rekey
    • Not in use
  • status
    • Shows the current status of the GateManager
  • list
    • Lists connected devices
  • backup
    • Initiates a backup
  • routes
    • Lists current static routes
  • recover_admin
    • Creates a recovery admin account (Username: RecoveryAdmin - Password: gatemanager)*
  • hostname
    • Shows Current Hostname
  • help
    • Shows the "Help" menu
* Note: The RecoveryAdmin account alias is removed on first login. One-time password introduced with GateManager v9.3

Was this article helpful?