Recently viewed tickets

Log out

Getting a SiteManager online using LAN

First of all, you need to configure the SiteManager either by USB, DEV port or via the Appliance Launcher.

For any SiteManager model, you just put a cable with internet access in the Uplink port.

You can define a static IP address if needed under the System-Uplink settings, but the default is DHCP mode.

Creation date: 11/12/2019 14:48 (skr@secomea.com)      Updated: 23/03/2021 13:52 (jmp@secomea.com)
Getting Started with your Secomea solution