- GateManager Own - Datalogging Scenarios
- LogTunnel Scenarios
- SiteManager Embedded Scenarios
- SiteManger Scenarios
Universal Robots - ARCS
This article contains all you need to know to get started with ARCS (Airgate Robot Communication Solution) for your UR3, UR5 or UR10. The ARCS software is designed to get Remote access for your Robot interface as well as SMS notifications for various "Stop" events.
The ARCS Software is developed by
, and distributed through the Secomea distribution channel.
Remote connection happens securely through the Secomea solution.
- Ordering the ARCS License Key
- Download the ARCS URCap
- Install the ARCS URCap on your robot
- Configure the Secomea SiteManager
- Install your Secomea SiteManager inside the robot.
- Setup the network of the Robot
- ARCS: License Key
- ARCS: Main Configuration
- ARCS: Setup Users & Events (SMS Notifications)
- ARCS: Enable Remote access (VNC)
- ARCS: Programming example
- ARCS: Useful information (FAQ)
You need to have a Secomea GateManager account and a LinkManager Mobile account.
The following equipment is needed:
- Secomea SiteManager (With internal 3G/4G modem if you want the SMS function)
- Universal Robot
- USB Stick
- Mobile phone that can receive SMS
If you are a new Secomea customer that has received a Starter Package, please go through our "Getting Started" guide here before continuing with this article: https://secomea.com/starter-package/
Ordering the ARCS License Key
The ARCS software requires an activation Key. This key should be ordered through your local distributor or Point of purchase.
You can also try the 7-Day free trial! It requires that you already have a SiteManager & GateManager account.
When ordering the License key, you need to have the Serial number of your robot ready:
To Aquire the Serial number of your robot, click about on the main page of your tendant.
When the order is completed you should receive an email containing the License key for the ARCS software:
License from email:
Ordered Airgate license key(s):
Old Robot Sr. No. | New Robot Sr. No. | License Key
| 2014339999 | 68892e215bb23cf9
Download the ARCS urcap
You can download the latest ARCS urcap (Software for the Robot) from the below link:
Release notes on the ARCS urcap can be found here:
NOTE: BE AWARE THAT MICROSOFT INTERNET EXPLORER/EDGE CAN CHANGE/MANIPULATE THE DOWNLOADED FILE TO BE A ZIP FILE, MAKING IT NOT RECOGNIZABLE BY THE ROBOT.
USE MOZILLA FIREFOX OR GOOGLE CHROME TO DOWNLOAD THE FILE.
Transfer the ARCS urcap file to a USB stick.
A standard FAT formatted USB stick should work. For more info on creating a USB stick for your robot, please visit Universal Robots support site. www.universal-robots.com/support
- Insert the USB stick containing the file in the UR Tendant or inside the controller of the robot:
Install the ARCS URCap on the Robot
Setup Robot -> URCaps
Click the Add ( + ) and Select the USB Disc.
Select the arcs urcap file. Open and finally restart the robot.
The ARCS Software is now installed.
Configuration of the Secomea SiteManager
We assume that the SiteManager is already configured to connect to the Secomea GateManager. Make sure the following configuration is done:
From your GateManager portal, select the SiteManager and click "SiteManager GUI"
Note down the IP address of the DEV1 port (In this case 10.0.1.249)
Go to the Maintenance -> Password and set the Admin password.
Note it down (In this example the password is admin1234)
Go to GateManager -> Alerts and make sure the settings are as below:
Go to GateManager -> Agents. Create a new agent. Select the "Universal Robots" agent and specify the IP address of the robot.
With SiteManager firmware OLDER than 7.3 you will have to specify the VNC parameters as shown on the picture below:
Install the Secomea SiteManager inside the robot
It is not necessary to install the SiteManager inside the robot. However it is a possibility. The SiteManager can be installed in the side or the bottom of the controller box with the optional UR KIT.
Connect the DEV1 port of the SiteManager to the Ethernet of the robot.
(UPLINK can be used for internet connection)
Setup the network of the robot
Set the IP Address of the Robot. The IP Address should be what previously was configured in the SiteManager agent configuration. be in the same scope as the DEV port of the SiteManager.
In this example the DEV1 port of the SiteManager has the IP 10.0.1.249 and the Robot 10.0.1.10.
ARCS: License Key
On the Robot, go to Program Robot -> Installation
Select the "Airgate Robot Communication" in the left pane. Select the "License Key" field and enter your license key previously obtained through the email from Secomea License Portal. See the Ordering the ARCS License key
After a successful validation of the license key, the Airgate GUI will appear and the License key field will grey out.
ARCS: Main Configuration
ARCS: Setup Users & Events (SMS Notifications)
The SMS Notifications allows users to get a notification/alert if the Robot is stopped. It also gives the users the possibility of checking in/out to the active list of users who should receive alerts.
In order to use the SMS notifications, you need to setup users as well as events.
Now when any event is triggered, the users that are checked in will receive an SMS.
ARCS: Enable Remote Access (VNC)
To enable "Remote access" enter the Remote Access tab.
When enabling the remote access (VNC connection) you can specify a password and for how long the connection should be open. The Remote Access light will turn green to indicate it is enabled.
Connect with Secomea LinkManager Mobile
When the Remote Access is enabled, it is possible to login with your LinkManager or LinkManager Mobile and control the robot.
Login to your LinkManager mobile by entering your GateManager address in a browser:
Select your Robot agent. (In this example: UR3)
Press the VNC button. Now you can choose the secure in-browser VNC or you can switch to an external VNC viewer of your choice.
Below is an example of the secure in-browser connection with an iPad.
ARCS: Programming example
Below is an example where we use the SMS feature inside the programming of the UR Robot.
ARCS: Useful information (FAQ)
Red: If the ARCS Service isn't running.
Yellow: Seen under startup of service.
Green: ARCS-service running.
Red: No SiteManager responding on the configured IP.
Yellow: ARCS can see the SiteManager, but the Admin password is wrong.
Green: ARCS connected successfully to the SiteManager.
Red: UPLINK2 on the SiteManager is not connected.
Yellow: UPKLINK2 on the SiteManager has "Limited connection".
Green: UPLINK 2 is connected with good connection.
Yellow: Remote access disabled.
Green: Remote access enabled.