avatar  


Recently viewed tickets

Log out

Combine SIM card and WIFI - setup


Purpose


Here we will show how to set up a SiteManager using both SIM and WIFI at the same time.


Information



Wireless x 2

Internet from SIM card and WIFi that devices can use.




SiteManager support for WiFi Access Point (AP):

From release 7.3 you can insert a Secomea enabled WiFi USB adapter and enable WiFi AP mode on any SiteManager. (More on 7.3 here )

Note:

• Only WiFi USB adapters purchased through Secomea will be able to enable this functionality.

• If the SiteManager was turned on when inserting the WiFi USB adapter, the SiteManager must be rebooted for the functionality to be enabled.





Step1

Uplink2 - SIM setup

Under Uplink2 you will see the SIM card information as normal

Step2

From release 7.3, the following will be displayed on the DEV interface pages: WIFI SSID, WIFI KEY, WIFI Mode, 802.11 modes and Channel. Here you can put in SSID and WIFI key.

When clicking Save, the system will ask you to reboot, to enable the changes


Related Articles


Creation date: 11/12/2019 13:00 (skr@secomea.com)      Updated: 03/05/2021 14:19 (ran@secomea.com)