This guide will show how to install a virtual GateManager on Amazon Cloud.
How to connect to it via Putty, which can be downloaded from here:
https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
It's important to update the GateManager to newest firmware version after it have been installed.
Follow this guide to update the firmware:
https://kb.secomea.com/hc/en-us/articles/115001080045
And how it start the setup of the GateManager
- From the Amazon cloud Console, find and click launch a virtual machine.
- On the Choose an Amazon Machine Image, click on Community AMIs.
- And search for Secomea and click select.
- Choose what instance to install it on the Choose an Instance Type page, the recommended minimum specs are the t2.small instance. Click review and Launch.
- On the Configure Instance Detail, configure it to suite your network needs, once done click Review and Launch.
- On the Review Instance, find and click the Edit Security Group.
- Create the ports as seen below. These are the standard port configuration for a GateManager, change them to fit your need if necessary. Click Review and Launch when done.
- Review the instance, if needed. Click Launch, to create the instance.
- Choose (1) Create a new Key Pair and (2) choose a name for it. Click (3) Download Key Pair, and save it. Then Click (4) Launch Instance.
- The instance will startup, once it’s ready click View Instance.
- In Putty Key Generator, click Load.
- Browser to where the Key Pair was downloaded, choose (1) to show All Files (*.*) and open the Key Pair.
- When it is successfully imported, click OK.
- Click Save private key.
- For more security you can passphrase protect for more security, if I is no needed, click Yes.
- Save file file.
- Startup Putty, and under SSH and Auth, click browser and locate the file you just saved.
- Find the public IP of the Instance, in the AWS console.
- And type in the public IP of the Instance, in the session tab and click Open.
- Click Yes to the Security Alert.
- Login with the Instance user.
- If unsure about the Instance username, login with root and it will tell you what user to logged with.
- Enter the hostname for the GateManager.
- Type "Yes" to install the GateManager.
- Enter Company Name, Department, Country Name, Country Code, City, Email and Keyword(s).
- Type "Yes" to start up the GateManager.
- Reboot Instance by Typing "Yes".
- Once it has rebooted, open a browser, and enter the public IP followed by /admin, and if it is running, it will show you the login page. Login in the the default username:Administrator
- Log in the with the default username and password.
Username: Administrator
Password: gatemanager
Remember to update the GateManager firmware after it have been installed.
Follow this guide to update the firmware:
https://kb.secomea.com/hc/en-us/articles/115001080045
Further information on how to configure the GateManager 8250 can be found here.
Step 1:
https://ftp.gatemanager.dk/DP_GM-0002-GateManager_Server_8250_STEP1.pdf
Step 2:
https://ftp.gatemanager.dk/GateManager%20Server%208250-9250%20STEP2_v4.1.pdf
Comments
0 comments