Here we will show how to setup a SiteManager using both SIM and WIFI at the same time.
SiteManager support for WiFi Access Point (AP):
From release 7.3 you can insert a Secomea enabled WiFi USB adapter and enable WiFi AP mode on non xx49 models of SiteManagers. (More on 7.3 here)
• Only WiFi USB adapters purchased through Secomea will be able to enable this functionality.
• Only the following SiteManager models will support WiFi AP mode: 1129, 1139, 3329, 3339, 3429 and 1429.
• If the SiteManager was turned on when inserting the WiFi USB adapter, the SiteManager must be rebooted for the functionality to be enabled.
Wireless x 2
Internet from SIM card and WIFi that devices can use.
Uplink2 - SIM setup
Under Uplink2 you will see the SIM card information as normal
From release 7.3, the following will be displayed on the DEV interface pages: WIFI SSID, WIFI KEY, WIFI Mode, 802.11 mode and Channel. Here you can put in SSID and WIFI key.
When clicking Save, the system will ask you to reboot, to enable the changes