This Article will provide information on how to operate the I/O ports of the SiteManager.
This document is supplementary to the “SiteManager Initial Contact” leaflets and the SiteManager product data sheets.
About GND, 0V GND and Shield
On the SiteManager the power should be applied between GND and +V as shown.
On some industrial equipment, you will find that power should be supplied between terminals marked -V or 0V and +V, and where -V/0V, GND and Shield may have different potentials. The specifications for a USB port is that GND and Shield should have the same potential, and since the SiteManager has a USB port, the GND and Shield is per design short circuited internally.
It is also intentional that there are no separate -V/0V pins on the SiteManager, since the presence of the USB port would make it extremely difficult to protect the power regulation circuitry in the SiteManager, should you by accident apply voltage between -V/0V and GND.
This would typically not be an issue even in cases where GND and Shield are wired separately.
See guide below for more details.