Purpose
This article will provide basic information on our SiteManagers, and link to our Application notes manualsthat shows more advanced features of the SiteManager.
Information
SiteManager is the hardware (or software) that you place in your remote location where you would want to gain access to a device. Its easy to set up, easy to use and and easy to configure both remote and locally.
Installation
Installation of a SiteManager takes around 15 minutes and only requires a computer and a power supply.
- Power
- Attach the power supply (12-24 V) to the GND and +V terminals.
- Note: The official power voltage tolerance for SM is 5% tolerance. (25.2V)
In reality, the absolute maximum is 26.4V
- Note: The official power voltage tolerance for SM is 5% tolerance. (25.2V)
- Attach the power supply (12-24 V) to the GND and +V terminals.
- Configuration
- Connect the DEV1 or UPLINK1 port of the SiteManager to the local network. (Or directly to your compuer)
- Download, install and run Appliance launcher from our download page
- Power on the SiteManager
- Click Search in appliance launcher, after 30 seconds.
- Follow the on screen instructions.
We also have a small video with a walk-through on how set up a SiteManager:
Application Notes
- Initial Setup
- Mobile Network:
- Agents:
- LogTunnel and Relays
- Misc
- SiteManager xx29, xx39 and xx49 Working with I/O Ports
- NTP server access via SiteManager
- SiteManager to GateManager access via a corporate Intranet
- SiteManager Embedded (SM - E) Requirements for Internet access
- Ping/Trace Tool
- Resetting an Appliance
- WiFi USB Adapter Initial Contact
- EasyTunnel Overview
Comments
0 comments