This article will provide information on what the different LED states are.
|State (All models)||STATUS||CONNECT|
|Booting||Sready RED Blink||-|
|2 RED blink||-|
|- Remote Management is disabled via
INPUT1 or SiteManager GUI
-SiteManager in SMS Wakeup mode
|-||Long pause + 2 GREEN blink|
|GateManager Connected||On GREEN||-|
|- UPLINK is physically disconnected, or
- GateManager configuration is missing
in the SiteManager, or
- No route to GateManager host due to
its address being configured as DNS
name, and a DNS server is not configured or is not reachable/working.
|LinkManager Connected||-||On GREEN|
State (xx39 models only)
|No SIM card detected||
|Wrong or missing SIM Pin code||3 GREEN blink|
|SIM PIN code OK, but no connection.
(Trouble shoot in SiteManager GUI)
|2 GREEN blink|
|GPRS connected (slow connection)||on GREEN + 1 GREEN blink|
|3G connected (fast connection)||On GREEN|
|SiteManager is in SMS Wakeup mode||Long pause + 2 GREEN blink|
Log LED status:
b - boot stage is complete.
c - LM connection terminated.
G - initiating GM connection.
H - initial GM connection state: not connected (normally G will follow if GM address is configured)
Example of LED Status seen in Log > System:
Jan 1 01:23:45 daemon.debug IFCONFIG: Set wwan led state: 'H'
3G USB dongle:
Searching for 3G
|Blue||2G Connection||Searching for 2G|