---
title: "How to setup DHCP on DEV 1"
slug: "how-to-setup-dhcp-on-dev1"
updated: 2021-08-06T12:52:34Z
published: 2021-08-06T12:52:34Z
canonical: "kb.secomea.com/how-to-setup-dhcp-on-dev1"
stale: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://kb.secomea.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to setup DHCP on DEV 1

The purpose of this article is to show how to setup DHCP on DEV1

1. Open up the SiteManager GUI and go to System>DEV1>DHCP>> ![](https://cdn.document360.io/88f49507-a7a0-4636-b297-13c4d0065310/Images/Documentation/image-1628253945645.png)

2. Here, it is possible to configure the DHCP range through Pool 'Start' and 'Stop', in this example we set the DHCP range to 192.168.0.50-55 ![](https://cdn.document360.io/88f49507-a7a0-4636-b297-13c4d0065310/Images/Documentation/image-1628254054110.png)

Note that 'DHCP Server Mode' is Enabled, and Click 'Save'

3. If for example a PC is connected through DHCP via Ethernet, it will now be given a Lease, these can be seen in Leases>>

![](https://cdn.document360.io/88f49507-a7a0-4636-b297-13c4d0065310/Images/Documentation/image-1628254123389.png)

And would show up like this:

![](https://cdn.document360.io/88f49507-a7a0-4636-b297-13c4d0065310/Images/Documentation/image-1628254144099.png)

Ít is also possible to check if the correct IP was configured by running an 'ipconfig' through 'command prompt'