SiteManager information and manuals
- 24 Jan 2022
- 1 Minute to read
-
Contributors
-
Print
-
DarkLight
-
PDF
SiteManager information and manuals
- Updated on 24 Jan 2022
- 1 Minute to read
-
Contributors
-
Print
-
DarkLight
-
PDF
This article will provide basic information on our SiteManagers, and link to our Application notes and manuals showing more advanced features of the SiteManager. SiteManager is the hardware (or software) that you place in your remote location where you would want to gain access to a device. It's easy to set up, easy to use and easy to configure both remotely and locally.
Installation
Installation of a SiteManager takes around 15 minutes and only requires a computer and a USB key, and a power supply.
- Power
- Attach the power supply (12-24 V) to the GND and +V terminals.
- Note: The official power voltage tolerance for SM is +20/-15%.
- Attach the power supply (12-24 V) to the GND and +V terminals.
- Configuration
- See the guides for configuration using USB, DEV port or Appliance Launcher.
We also have a short video with a walk-through on how to set up a SiteManager:
Application Notes
- Initial Setup
- Mobile Network
- Agents
- LogTunnel and Relays
- Misc
- SiteManager xx29, xx39 and xx49 Working with I/O Ports
- NTP server access via SiteManager
- SiteManager to GateManager access via a corporate Intranet
- SiteManager Embedded (SM - E) Requirements for Internet access
- Ping/Trace Tool
- Resetting an Appliance
- WiFi USB Adapter Initial Contact
- EasyTunnel Overview
- Troubleshooting
Was this article helpful?