GateManager Commands
- 26 May 2021
- 1 Minute to read
-
Contributors
-
Print
-
DarkLight
-
PDF
GateManager Commands
- Updated on 26 May 2021
- 1 Minute to read
-
Contributors
-
Print
-
DarkLight
-
PDF
Introduction
The following describes commands provided by the GateManager server in the Linux shell.
Commands
You can use the following commands to control GateManager via the CLI (Command-line interface) i.e., “gm” The example below will show you the current status of your GateManager:
gm status
- start
- Starts the GateManager
- stop
- Stops the GateManager
- restart
- Restarts the GateManager
- rekey
- Not in use
- status
- Shows the current status of the GateManager
- list
- Lists connected devices
- backup
- Initiates a backup
- routes
- Lists current static routes
- recover_admin
- Creates a recovery admin account (Username: RecoveryAdmin - Password: gatemanager)*
- Creates a recovery admin account (Username: RecoveryAdmin - Password: gatemanager)*
- hostname
- Shows Current Hostname
- help
- Shows the "Help" menu
* Note: The RecoveryAdmin account alias is removed on first login. One-time password introduced with GateManager v9.3
Was this article helpful?